Morel 6.5 Inch 4 Ohm Hybrid Woofer - MOHYB-MW6MKII

WAS $849.95
$799.95 / Pair

All of the Hybrid MW models incorporate Morel’s core technologies. A 2 ¼” Aluminum Hexatech Extrenal Voice Coil wound on an aluminum former enables stable, efficient and linear piston-like movement which effectively reduces distortion levels. Morel’s optimized one-piece DPC cone forms a flat geometric plane that improves sound dispersion and dynamics, creating a realistic three-dimensional sound presentation.

The new Hybrid woofers’ suspension improves the mechanical movement and stability of the membrane, attributing it to very low distortion level at high power and better low frequency dynamic range.

The Hybrid MW woofers innovative design is key to the powerful transient sound quality it delivers.



DPC, or Damped Polymer Cone, is a direct derivative of the cones Morel has built its reputation upon. With high self-damping characteristics, this cone provides exceptional sound quality without coloration or harshness.



Made from 100% aluminum wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, thereby increasing efficiency by up to 20%. Being lightweight, Hexatech™ voice coils are largely responsible for the extraordinary fast transient response Morel drive units are known for.



The Hybrid motor drive system uses a ferrite magnet together with a very powerful neodymium magnet. Combined they create a compact, lightweight motor system that is up to four times more powerful than conventional designs of the same size. With Hybrid, more amplified power is converted into sonic energy for flawless performance, even in a small driver.

Mounting Cutout141 (5.55)
Net Wight Kg (lb)0.60 (1.32)
Mounting Depth mm (inch)61 (2.40)
Unit Diameter mm(inch)165 (6.50)
Cone MaterialDPC
Cone TypeOne-piece formed
Effective Piston Area SD (sq.inch)119 (18.45)
Equiv. Can Air Load VAS - L (cu.ft3)21 (0.74)
Moving Mass MMS - gr/ounce11
Mech. Resistance RMS- N . S / M1.5
Electrical Q Factor QES0.56
Suspension Compliance CMS - mm/N1.1
Max. Linear Ex./Xmax mm (inch)7 ± 3.5mm (0.28 ± 0.14)
BL Product/BXL4.2
B-Flux Density (T)0.83
HE-Magnetic Gap Height mm (inch)4 (0.16)
Magnet SystemHybrid rear vented
Voice Coil Induct. @1 kHz (mH)0.22
DC Resistance (ohm)3
Voice Coil WireHexatech™ Aluminium
Voice Coil Type/FormerAluminium
Voice Coil Height mm (inch)11 (0.47)
Resonant Freq. Fs Hz45
Voice Coil Diameter mm (inch)54 (2.1)
Frequency response Hz35 - 3000
Sensitivity (2.83 V/1M) dB91
Max. Trans. Pwr Handling Wrms600
Power Handling Wrms140
Nominal Impendance (ohm) 44

Write a review