Alpine 12 Dual Voice Coil (2 Ohm) High Performance Subwoofers - S-W12D2

Model #:S-W12D2
$279.00
Availability In Stock

S-SERIES: BENCHMARKING A WHOLE NEW LEVEL OF PERFORMANCE

The S-Series subwoofers are designed with increased bass output and installation versatility. These hard-working subwoofers add bass and impact to your music without stretching your wallet. All S-Series subwoofers are sold as single pieces.

Speaker Rating:

Max RMS Power Capacity: 600W RMS

Peak Power Capacity: 1800W Peak Power

OVERVIEW:

  • 12 2 2 Subwoofer
  • Power Handling: 600W 1800W
  • High Strength Custom Steel Frame
  • Great complement to V-Power Amplifiers
  • Frequency Response: 26Hz-200Hz
  • Mounting Depth 5-1/16
  • Recommended Sealed Box: 0.85 cubic foot (gross volume)
  • Recommended Vented Box: 1.71 cubic foot (gross volume), 12.5 x 1 vent area, 16 vent length

VERSATILE APPLICATIONS

Along with the new 8 woofer, the 10 and 12 S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10 and 12 subwoofers are almost 1 more shallow than previous models at just over 4.5 for the 10 models and just over 5 for the 12 models, allowing them to fit into a wide variety of installation applications.

600W POWER HANDLING

The 10 and 12 S-Series subwoofers are engineered with an improved voice coil allowing the woofer to benefit from an increased power rating of 600 watts. Match them with the powerful VPower MRV-M500 mono amplifier for a great subwoofer system.

CUSTOM-STAMPED STEEL FRAME

Each S-Series subwoofer uses a custom-stamped steel frame. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents as well as a vented back plate to help cool the subwoofer voice coil and motor parts, plus a shallow design to help fit in smaller spaces.

PUSH-TYPE INSERT TERMINALS WITH DUAL VOICE COIL JUMPER SYSTEM

The push-type insert terminals help reduce the installation time of the S-Series subwoofers. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal.

STRONTIUM FERRITE DOUBLE-STACKED MAGNETS

The S-Series subwoofers use two strontium ferrite magnets stacked together, for increased motor strength and excursion which ultimately leads to more bass output.

CLEAN, CONCEALED MOUNT GASKET SYSTEM

The S-Series subwoofers have concealed mount gaskets, creating a clean, finished appearance for any vehicle.

OPTIONAL GRILLES

All S-Series subwoofers are compatible with optional grilles (sold separately) to provide added protection to the cone. The grilles feature a mesh design with a S-Series logo badge. Choose from the following to match the size of your subwoofer; all grilles are sold as single pieces.

  • KTE-8G: For 8 S-Series Subwoofers
  • KTE-10G.2: For 10 S-Series Subwoofers
  • KTE-12G.2: For 12 S-Series Subwoofers

Write a review